•	Kvs	:	3,8 5,1 9,4 15,4 22,2 40,1 63,4 89,7 136,7
•	Sizes	:	DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100
•	Bonnet	:	Standard – up to 220 ºC;
•	Stem Sealing	:	PTFE/GR V-Rings – up to 220 ºC. Graphite – up to 300 ºC.
•	Port	:	Full port
•	Max air Supply	:	3,5 bar.
•	Material	:	PV25G-OF – SG iron. PV25I-OF – stainless steel

The PV25 On-Off valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator comprises a rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, steam, air, gas and other non corrosive fluids.

• Single seated, two way, direct or reverse action valve.
• Valve top flange permanently attached to the body, removal is unnecessary for replacing the actuator.
• Soft sealing as standard.
• Sterilize workpieces

•	Kvs	:	3,8 5,1 9,4 15,4 22,2 40,1
•	Sizes	:	DN 15 DN 20 DN 25 DN 32 DN 40 DN 50
•	Bonnet	:	Standard – up to 220 ºC;
•	Stem Sealing	:	PTFE/GR V-Rings – up to 220 ºC. Graphite – up to 300 ºC.
•	Port	:	Full port
•	Max air Supply	:	3,5 bar.
•	Material	:	PV40S and EV40S – steel. PV40I and EV40I – stainless steel.

The PV40 control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The PV40 valves have been designed to ensure an accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, steam, air, gas and other non corrosive fluids.

•	Kvs	:	6,3 16
•	Sizes	:	3/4” – DN 20 1” – DN 25 DN 32 11/2” – DN 40 2” – DN 50
•	Bonnet	:	Standard – up to 220 ºC;
•	Stem Sealing	:	PTFE/GR V-Rings – up to 220 ºC. Graphite – up to 300 ºC.
•	Port	:	Full port
•	Manual Operation	:	Hand ,Foot
•	Material	:	VPA26/2S – carbon steel. VPA26/2I – stainless steel.

The VPA26/2 blowdown valve series were specially designed for application on steam boilers, to remove sludge sediments which naturally settle on the bottom of the boiler. These intermittent valves operate manually or automatically with timed control. This valve is available with a diaphragm actuator and/or manual operation lever.

•	Kvs	:	4 6,3 10 16 25 40
•	Sizes	:	DN 15 DN 20 DN 25 DN 32 DN 40 DN 50
•	Bonnet	:	Standard – up to 220 ºC;
•	Stem Sealing	:	PTFE/GR V-Rings – up to 220 ºC. Graphite – up to 300 ºC.
•	Port	:	Full port
•	Max air Supply	:	3,5 bar.
•	Material	:	PV403S and EV403S – steel. PV403I and EV403I – stainless steel

The PV403 control valves are three-way valve body for mixing service. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The V403 valves have been designed to assure an accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, diathermic oil, steam, air, gas and other non corrosive fluids.